Bonito Switchbox


To the Bonito software a small comport interface belongs,
  that for the steering of a receiver (radio-control) is used
 or that to the reading of NMEA - data is needed.

This small interface is called 'switchbox'. Swichbox, because it is used for switching (Transistors are also switches). There are controlled a lot of things within the switchbox, so that your radio works right.

It is marked often as 'dongle', is not it from.
But really, it exactly so working !

 IC-PCR:   only for ICOM PCR-1000 - only for receiving
The Switchbox IC-PCR is used for MARINE and it becomes exclusively with the receiver PCR-1000 or 100 and with the Software Prometeo / BoardTerminal pursued.
 NautiCom:  for all other Radios - only for receiving
The Switchbox NautiCom is used for MARINE. In connection with the software BoardTerminal it can steer all radios, not however the PCR-1000 or 100.
 IC-SWL:   only for ICOM PCR-1000 - only for receiving
The Switchbox IC-SWL wird für HAM-RADIO and it becomes exclusively with the receiver and with the Software RadioCom pursued.
 RC-SWL:  for all other Radios - only for receiving
The Switchbox RC-SWL is used for HAM-RADIO  In connection with the software RadioCom-RX  it can steer all radios, not however the PCR-1000 or 100.
 RC-HAM:  for all Radios - for transmitting and receiving
The Switchbox RC-HAM is used for HAM-RADIO. In connection with the software RadioCom-TX  it can steer all radios, not however the PCR-1000 or 100.

(c) 2000 BONITO Germany

Web: www.bonito.net      email: info@bonito.net

Back